Ua hana ʻo ABIS i nā PCB alumini no nā makahiki he 10.ʻO kā mākou hiʻohiʻona piha alumini kaapuni hiki iā ʻoe ke kiʻi i nā PCB alumini kiʻekiʻe i loko o ka waihona kālā.
Aluminum PCBs Introduction
-Wehewehe
Aluminum ʻO ke kumu he CCL, he ʻano mea kumu o nā PCB.ʻO ia he mea hoohuihui i hakuia ʻO ka pahu keleawe, kahi papa dielectric, kahi papa kumu alumini a me ka membrane kumu alumini me a hoʻopau wela maikaʻi. Ke hoʻohana nei i kahi ʻāpana lahilahi o ka dielectric conductive thermally akā insulating uila, i laminated ma waena o ke kumu metala a me ka papa keleawe.Hoʻolālā ʻia ke kumu metala e huki i ka wela mai ke kaapuni ma o ka dielectric lahilahi.
No ke aha i hoʻohana ʻia ai ka Aluminum i ke kukui LED?
-ʻO ka māmā ikaika i hanaʻia e nā LED e hana i nā kiʻekiʻe o ka wela, kahi e alakaʻi ai ka alumini mai nā mea.Hoʻonui ka PCB alumini i ke ola o kahi mea LED a hāʻawi i ka paʻa.
-Hiki i ka alumini ke hoʻoneʻe i ka wela mai nā mea koʻikoʻi, no laila e hōʻemi ana i ka hopena ʻino e loaʻa iā ia ma ka papa kaapuni.
ʻO ABIS Metal Core PCB ka mana hana
| 'ikamu | Speci. |
| Nā ʻāpana | 1~2 |
| Mānoanoa Papa Hoʻopau Maʻamau | 0.3-5mm |
| Mea waiwai | Kumu Aluminum, Kumu keleawe |
| Nui Nui o ka Panel | 1200mm*560mm(47in*22in) |
| Min Hole Nui | 12mil(0.3mm) |
| Min Laina Laulā/Lua | 3mil(0.075mm) |
| Mānoanoa Copper Foil | 35μm-210 μm (1oz-6oz) |
| Mānoanoa keleawe maʻamau | 18 μm , 35 μm , 70 μm , 105 μm . |
| Noho Mānoanoa Hoʻomanawanui | +/-0.1mm |
| Alanui Outline tolerance | +/-0.15mm |
| Kuʻi ʻana i ka hoʻomanawanui | +/-0.1mm |
| ʻAno Māka Solder | LPI (kiʻi kiʻi wai) |
| Mini.Hoʻomaʻemaʻe Palekana Solder | 0.05mm |
| Anawaena Puka Puka | 0.25mm--0.60mm |
| Ka hoʻomanawanui impedance | +/-10% |
| Hoʻopau ʻili | Alakaʻi manuahi HASL, gula immersion (ENIG), sliver immersion, OSP, etc |
| Palekana Solder | Kuʻuna |
| Silkscreen | Kuʻuna |
| MC PCB Hoʻokuʻu ʻia | 10,000 sqm / mahina |
ABIS Nā PCB Aluminum Ka manawa o waena o ka hoʻomaka a i ka wā pau
E like me ke kumu nui o kēia manawa, hana mākou i ka PCB alumini hoʻokahi, ʻoiai ʻoi aku ka paʻakikī o ka hana ʻana i ka PCB alumini ʻelua ʻaoʻao.
| Volume Puʻupuʻu Liʻiliʻi ≤1 mika mika | Nā lā hana | Nuipa? iecaianoaaiiuo ＞1 sq mika | Nā lā hana |
| ʻaoʻao hoʻokahi | 3-4 mau lā | ʻaoʻao hoʻokahi | 2-4 pule |
| ʻaoʻao ʻelua | 6-7 mau lā | ʻaoʻao ʻelua | 2.5-5 pule |
Pehea ka hana ʻana o ABIS i nā pilikia o ka hana ʻana o ka Aluminum P CB?
- Hoʻomalu pono ʻia nā mea maka : ʻO ka helu hala o nā mea komo ma luna o 99.9%.ʻO ka helu o ka nui o ka hōʻole ʻana ma lalo o 0.01%.
- Hoʻomalu ʻia ke kala keleawe: ʻoi aku ka mānoanoa o ka pahu keleawe i hoʻohana ʻia i nā PCB Aluminium.Inā ʻoi aku ka nui o ka pahu keleawe ma luna o 3oz akā, pono ka etching i ka uku ākea.Me nā mea hana kiʻekiʻe i lawe ʻia mai Kelemania, ʻo ka min width / space hiki iā mākou ke hoʻokele a hiki i 0.01mm.E hoʻolālā pololei ʻia ka uku pānaʻi e pale aku i ka laulā o ka trace ma waho o ka hoʻomanawanui ma hope o ke kālai ʻana.
- Paʻi Kiʻekiʻe Solder Mask: E like me kā mākou e ʻike ai, aia kahi paʻakikī i ka paʻi ʻana i ka mask solder o ka PCB alumini ma muli o ke keleawe mānoanoa.No ka mea, inā mānoanoa loa ke keleawe meheu, a laila he ʻokoʻa nui ke kiʻi i kālai ʻia ma waena o ka trace surface a me ka papa kumu a paʻakikī ke paʻi ʻana i ka mask solder.Ke koi nei mākou i nā kūlana kiʻekiʻe loa o ka ʻaila solder mask i ke kaʻina holoʻokoʻa, mai ka hoʻokahi a hiki i ka paʻi ʻana i ka mask solder ʻelua.
- Hana Mechanical: No ka pale ʻana i ka hoʻemi ʻana i ka ikaika uila ma muli o ke kaʻina hana mechanical, e pili ana i ka hoʻoheheʻe ʻana i ka mīkini, ka hoʻoheheʻe ʻana a me ka v-scoring etc.Eia kekahi, ke nānā nui nei mākou i ka hoʻoponopono ʻana i nā ʻāpana drilling a pale ana burr mai ka hana ana.
ʻO ke kikoʻī o ka Aluminum Based Copper-clad Laminate
| | ltem | Hoao a kūlana | AL-01-P kikoʻī | AL-01-A Hōʻike | AL-01-L Hōʻike | Unite | | Māmā conductivity | A | 0.8 ± 20 ％ | 1.3 ± 20 ％ | 2.0 ± 20 ％ | 3.0 ± 20 ％ | W/mK | | Kūʻai wela | | 0.85 | 0.65 | 0.45 | 0.30 | ℃ /W | | Solder kūʻē | 288deg.c | 120 | 120 | 120 | 120 | Sec. | | Peel ikaika maʻamau kūlana | A Māmā kaumaha pou | 1.2 1.2 | 1.2 1.2 | 1.2 1.2 | 1.2 1.2 | N/mm | | Volume kūʻē maʻamau kūlana | C-96/35/90 E-24/125 | 108 106 | 108 106 | 108 106 | 108 106 | MΩ .CM | | Ili kūʻē maʻamau kūlana | C-96/35/90 E-24/125 | 107 106 | 107 106 | 107 106 | 107 106 | MΩ | | Dielectric mau | C-96/35/90 | 4.2 | 4.9 | 4.9 | 4.9 | 1MH2 | | Hoʻopuehu Kumukumu | C-96/35/90 | ≤ 0.02 | ≤ 0.02 | ≤ 0.02 | ≤ 0.02 | 1MH2 | | Wai omo ana | | 0.1 | 0.1 | 0.1 | 0.1 | % | | BreakdownVolte | D-48/50+D- 0.5/23 | 3 | 3 | 3 | 3 | KV/DC | | Ka ikaika hoʻokaʻawale | A | 30 | 30 | 30 | 30 | KV/mm | | Hoʻokiʻekiʻe kāmeʻa | A | 0.5 | 0.5 | 0.5 | 0.5 | % | | Ka hikiwawe | UL94 | V-0 | V-0 | V-0 | V-0 | | | CTI | IEC60112 | 600 | 600 | 600 | 600 | V | | TG | | 150 | 130 | 130 | 130 | ℃ | | Huahana mānoanoa | ʻO ka actinium pale ʻo ia mānoanoa ： 1 oz ~ 15 oz, ʻO ka aluminika papa ʻo ia mānoanoa ： 0.6 ~ 5.0 mm (Ka hoomanawanui laula ± 0.10mm) | | Huahana kikoʻī | 1000 × 1200 500 × 1200 (mm) |
● Leo alapine mea lako: komo, puka mea hoʻonui, uku ana capacitor, ka leo alapine mea hoʻonui, hoʻonui mua, mana mea hoʻonui etc.. ● Ka mana lako mea lako: series uila uila hooponopono, hoʻololi modulator, a DC-AC transducer...etc.. ● Ke kelepona electron mea lako: kiekie alapine mea hoʻonui, kānana kelepona, hoʻouna a telegarapa kelepona. ● Keena automate: ka mīkini paʻi kaʻa hoʻokele, nui uila uila hōʻike pani a wela paʻi A papa. ● kaʻa kaʻa:ka mea puhi ahi, mana lako mea hoʻololi a hoʻololi hoʻololi mīkini, mana lako hooponopono, lilo wale nō ʻōnaehana etc.. ● Heluhelu: CPU papa, palupalu pan kaʻa hoʻokele, a mana lako mea hana... etc.. ● Ka mana poʻo nuipa: loli i kahe a mīkini, paa relay, kaʻahele alahaka etc.. ● LED māmā, wela a wai lilo:nui mana LED māmā, LED pā etc.. |
He aha nā pōmaikaʻi o ka hana ʻana ma ABIS?
E nānā a puni ʻoe.No laila, nui nā huahana mai Kina.ʻIke loa, he mau kumu kēia.ʻAʻole ia e pili ana i ke kumukūʻai.
- Hoʻomākaukau koke ʻia nā huaʻōlelo.
- Hoʻopau koke ʻia nā kauoha hana. Hiki iā ʻoe ke hoʻolālā i nā kauoha i hoʻonohonoho ʻia no nā mahina ma mua, hiki iā mākou ke hoʻonohonoho koke iā lākou ke hōʻoia ʻia ʻo PO.
- Ua hoʻonui nui ʻia ke kaulahao lako .ʻO ia ke kumu hiki iā mākou ke kūʻai i kēlā me kēia ʻāpana mai kahi hoa hana kūikawā me ka wikiwiki.
- ʻO nā limahana maʻalahi a makemake .ʻO ka hopena, ʻae mākou i kēlā me kēia kauoha.
- 24 lawelawe pūnaewele no nā pono koʻikoʻi .Nā hola hana o +10 hola i ka lā.
- lalo koina. ʻAʻohe kumukūʻai huna.Mālama i nā limahana, luna a me ka logistic.
Puke a me ka lawe ʻana
ʻAʻole hoʻāʻo wale ʻo ABIS CIRCUITS Company e hāʻawi i nā mea kūʻai aku i kahi huahana maikaʻi, akā e hoʻolohe pū i ka hāʻawi ʻana i kahi pūʻolo piha a palekana. Eia kekahi, hoʻomākaukau mākou i kekahi mau lawelawe pilikino no nā kauoha āpau.
-Paʻi maʻamau:
- PCB: ʻeke i hoʻopaʻa ʻia, ʻeke Anti-static, pahu pahu kūpono.
- PCBA: ʻeke ʻeke antistatic, ʻeke anti-static, pahu pahu kūpono.
- Hoʻopili pilikino: E paʻi ʻia ka pahu pahu ma waho i ka inoa o ka helu o ka mea kūʻai aku, hōʻailona, pono ka mea kūʻai aku e kuhikuhi i ka huakaʻi a me nā ʻike ʻē aʻe.
- Manaʻo hoʻouna:
- No ka pūʻolo liʻiliʻi, manaʻo mākou e koho ma E x kaomi a i ʻole DDU ʻO ka lawelawe ke ala wikiwiki loa.
- No ka pūʻolo kaumaha, ʻo ka hopena maikaʻi loa ma ke kaʻa kai.
ʻŌlelo Pāʻoihana
- ʻAe ʻia nā ʻōlelo hoʻouna
FOB, CIF, EXW, FCA, CPT, DDP, DDU, Hoʻouna Hōʻike, DAF
-- ʻAe ʻia ke kālā uku
USD, EUR, CNY.
- ʻAno uku ʻae ʻia
T/T, PayPal, Western Union.
Kuhikuhi mai ABIS
No ka hōʻoia ʻana i kahi ʻōlelo kūpono, e hoʻokomo i kēia ʻike no kāu papahana:
- E hoʻopiha i nā faila GERBER: me ka papa inoa BOM
- Nui: E koho i ka helu (pcs)
- Ana: Kiʻekiʻe X Laulā mm
- Ka manawa huli: nā lā hana
- Nā Koina Panelization
- Pono Mea
- Hoʻopau i nā koi
E hāʻawi ʻia kāu ʻōlelo maʻamau i nā hola 2-24 wale nō, ma muli o ka paʻakikī o ka hoʻolālā. E ʻoluʻolu e hoʻomaopopo iā mākou no nā mea hoihoi!
Manaʻo ʻo ABIS i kāu kauoha ʻoiai ʻo 1 ʻāpana!
English en 
